Monthly Tech-Tip | No tracking! No ads! |
Same clay body: Plainsman Coffee Clay. Same glaze: MA6-C rutile blue. But the mug on the left was fired in the PLC6DS schedule (normally that one does not produce this much blue, but the heavily pigmented clay brings it out). The one on the right was fired in the C6DHSC schedule. That schedule also improves the gloss and surface quality of the inside GA6-B liner glaze.
Rutile blue glazes are actually titanium blues (because rutile mineral is an impure source of TiO2 and Fe2O3). The iron and titanium in the rutile react to form the floating blue effect. The GA6-C recipe has always relied on a 4% rutile addition. Its GA6-A base recipe contains significant iron (because of the 80% Alberta Slip), so could titanium oxide deliver the same floating blue effect? Yes. These mugs are M390 clay. The top left one is the standard GA6-C (with rutile) fired using the C6DHSC slow-cool firing schedule (the bottom left normal cool PLC6DS schedule produces little color). But the ones on the right switch the 4% rutile for titanium dioxide (the L4655 recipe). The top right was fired using the slow cool, the bottom right was the normal cool schedule. Titanium is a much more consistent and reliable material than rutile. If it can produce an excellent blue color is produced even without a slow cool (lower right) then it is a better long-range choice.
Firing Schedules |
Plainsman Cone 6 Slow Cool
350F/hr to 2100F, 108/hr to 2200, hold 10 minutes, fastdrop to 2100, hold 30 minutes, 150/hr to 1400 |
---|
Buy me a coffee and we can talk